Passing of Steve Bjork, Computer Gaming Pioneer and CoCo Developer

We regret to announce the passing of Steve Bjork at 65 years of age on April 10, 2023. Steve was a foundational figure in the world of the Color Computer and a passionate developer for the Tandy Color Computer. For those who wish to pay their final respects in person, Steve’s final resting place is at the Oakwood Memorial Park in Chatsworth, California. Steve’s remarkable contributions have left a lasting impact on our community and will continue to inspire future generations.

More about Steven Bjork and who he was can be found here.

Shares
Steve Bjork presenting next to a computer.

In Memoriam: Steve Bjork, Pioneer and trailblazer of Personal Computing and the Tandy Color Computer

With a heavy heart, I tearfully announce the passing of Steve Bjork, a beloved pioneer in the world of computer gaming and a key figure in the Tandy Color Computer (CoCo) community. Steve’s career, marked by ingenuity and programmatic mastery, spanned over two decades, leaving an enduring legacy in the world of the CoCo and personal computing at large.

In the early years of computing, you could find him mingling with the likes of Steve Wozniak and Adam Osborne at the Homebrew Computer Club in Menlo Park. And just like these other pioneers of the computing age, Steve’s contributions weren’t limited to game development. He used his soldering iron just as much as he did the keyboard. He learned in college the importance of knowing both the hardware and the software side of a computer, and found great success in being able to handle both sides of the computer.

He took what he learned through The Homebrew Computer Club, in high school and college, and his experiences on the job at Radio Shack selling computers, and created hardware that found it’s uses across store shelves. He was particularly proud of his ability to corner the market on light pens by designing an inexpensive pen with good software. This was one of his personal favorite early accomplishments.

Steve then began his remarkable game making journey. His first published game was created in 1980, called “Space Ball” for the TRS-80 line of computers. This was an early showcase of his knack for games programming. Over the next few years he embedded himself as a cornerstone of the CoCo world, introducing classics like “Popcorn!” and “Audio Spectrum Analyzer” in 1981 and “Zaxxon” in 1983, a remarkable adaptation of the arcade favorite. He continued to make a multitude of game through the 80s like “Rampage” in 1989 and even into the 90s and spanning new console systems like “The Rocketeer” for the SNES. His games, known for their clever design and charm, brought joy to countless coconuts and gamers.

Steve’s greatest legacy is how deeply he inspired the entire community around the CoCo. You could find him at many Rainbowfests and CoCoFESTs, and other events over the years, even becoming a CoCo spokesman of sorts. He would speak, and teach others, and he would enjoy seeing what everybody was working on. Without Steve Bjork, the Color Computer would almost certainly have failed to become one of the most popular and beloved 8-bit machines that it is today.

As we say goodbye to Steve, we remember him for his kind spirit, his wonderful works, and his unwavering dedication to the art of game development and hardware design. His contributions and his passion have not only shaped the gaming world but have also touched the lives of countless individuals.

Steve leaves behind a legacy of innovation, inspiration, and innumerable fond memories in the hearts of those who played his games, used his hardware, and knew him. I want to extend my deepest condolences to his family, friends, and the CoCo community. Rest in peace, Steve Bjork. May your memory and your creations and the CoCo you loved so much live on forever.

Shares

Online Emulators for TRS-80!

I’m sure you’ve come here with the knowledge of the XRoar, MAME, CoCoPi and VCC emulators for the Color Computer and its family of hardware on your desktop/laptop computer.

Did you know there are a few emulators which run right in your modern web browser?

Try your hand at Microcolor BASIC 1.0 with an online MC-10 emulator. Or play your favorite CoCo 1, 2, or 3 games in the online XRoar available from the Color Computer Archive. But have you found the TRS-80 Model III javascript emulator?

The thumbnails above are links to their respective emulators.

I did a search to see what is available and this is what I’ve found. Are there more? Do you have an idea how to get the MAME emulation of the CoCos available in a browser? Up for a challenge? I’ve seen MAME booting other systems like the NES, SNES and maybe even an Atari 800.

If you’re able to find more, or build a working example… let’s see it!

Shares

Glenside Club Meeting: Thursday December 7, 2023 @ 7:30PM Central

Have a Happy CoCo Holiday!

With the season in full swing, treat yourself to that long awaited CoCo hardware upgrade or software title. If nothing else, think of the looks on your family’s faces when you open a vintage Tandy Color Computer 1 box wrapped (carefully, so as to not mess up the original packaging) and under the tree.

Please join us for our December meeting and ring out the year 2023, a great CoCo year! We’ll be considering the results of the meeting date/time poll (please cast your vote if you have not already), but otherwise have a light agenda. I hope we can take some time during or after the meeting for members to take a few moments and point their cameras to their current CoCo setup (big or small, real or virtual).

Please join us this Thursday. Since we have a belated board meeting that will be held immediately prior to our business meeting, we will be opening the call just a bit before 7:30PM.

Meeting Agenda

https://docs.google.com/document/d/1cZ-W0ckW_vDBfEx6Kf1XOp3fyhtI87VO/edit?usp=sharing&ouid=115546368758315252280&rtpof=true&sd=true

Join the Meeting

https://us06web.zoom.us/j/82797367585?pwd=OUxibkJaR2N1SUtSOU9EUUlYeXBJQT09

Meeting ID: 827 9736 7585
Passcode: GCCC

One tap mobile

+13126266799,,82797367585#,,,,*686821# (Chicago)

Meeting ID: 827 9736 7585
Passcode: 686821
Find your local number: https://us06web.zoom.us/u/kdIAqFZbZR

Please download and import the following iCalendar (.ics) files to your calendar system.
Monthly: https://us06web.zoom.us/meeting/tZYqfu6rqDwvEtGPAHF62Rhv1v5lakjdaO9W/ics?icsToken=98tyKuGqqTItGdKStRGCRpwQB4r4KOnwpmZYj7d6rD7NJXYBUAvgZ_QXPrN0GtzR

For those unable to join us on Zoom or have prior commitments, we will livestream and have a replay available on our Facebook page (https://www.facebook.com/groups/290791956162) and our YouTube channel (https://www.youtube.com/channel/UCFk2dMxcjJcX2qbSqFHQMbA).

Shares

Happy Thanksgiving to you all!

Happy thansgiving!
Thanksgiving just isn’t the same without you, K?

As a community we are all grateful for your being a part of something so long lived and great! May your CoCo bring you back to the joy of something old, and excitement with something made new again through contributions from you all.

Wishing you community, family, friendship and always with a CoCo in mind!

Shares

Glenside Club Meeting: Thursday November 2, 2023 @ 7:30PM Central

CoCo Thankfulness

The temperature is falling, but if you’re not into the colder weather, turn that frown upside down! Instead of turning up the heat in your home, just turn on your CoCo! That heavy transformer and linear power supply will keep your room nice and toasty. Play a game, run some OS9, or just stare at the green, your CoCo will keep you warm and keen.

Please join us for our November meeting and show your thanks for the platform and for GCCC (and CoCoFEST!) Also, another thanks to our 2022-23 officers who were nominated unopposed for another year and will be officially instituted at our meeting.

Please join us this Thursday. We will open the call a bit early at a new time: 7:00PM.

Meeting Agenda

https://docs.google.com/document/d/1cTcH_m3PmSyme_zrHYmVVAfviyOFtAsn/edit?usp=sharing&ouid=115546368758315252280&rtpof=true&sd=true

Join the Meeting

https://us06web.zoom.us/j/82797367585?pwd=OUxibkJaR2N1SUtSOU9EUUlYeXBJQT09

Meeting ID: 827 9736 7585
Passcode: GCCC

One tap mobile

+13126266799,,82797367585#,,,,*686821# (Chicago)

Meeting ID: 827 9736 7585
Passcode: 686821
Find your local number: https://us06web.zoom.us/u/kdIAqFZbZR

Please download and import the following iCalendar (.ics) files to your calendar system.
Monthly: https://us06web.zoom.us/meeting/tZYqfu6rqDwvEtGPAHF62Rhv1v5lakjdaO9W/ics?icsToken=98tyKuGqqTItGdKStRGCRpwQB4r4KOnwpmZYj7d6rD7NJXYBUAvgZ_QXPrN0GtzR

For those unable to join us on Zoom or have prior commitments, we will livestream and have a replay available on our Facebook page (https://www.facebook.com/groups/290791956162) and our YouTube channel (https://www.youtube.com/channel/UCFk2dMxcjJcX2qbSqFHQMbA).

Shares

Glenside Club Meeting: Thursday October 5, 2023 @ 7:30PM Central

CoCo Trick AND Treat Time!

Don’t let the spooky technical details of your CoCo keep you from enjoying it this Halloween season. There’s plenty of tricks still yet to explore on the platform, and finding them will be a treat!

As we bid “SepTANDY” a fond farewell, I’d like to thank those who attended our September Glenside Outing in West Dundee last month. Please join us at the October meeting and let us know how it went and what we should consider for 2024! Also, another thanks to our 2022-23 officers who were nominated unopposed for another year and will be officially instituted at our meeting.

Please join us this Thursday. We will open the call a bit early at a new time: 7:00PM.

Meeting Agenda: https://docs.google.com/document/d/1cELxnVxgoLq39h2ADpb0Z_JSLW-HAE8V/edit?usp=sharing&ouid=115546368758315252280&rtpof=true&sd=true

To join the Meeting

https://us06web.zoom.us/j/82797367585?pwd=OUxibkJaR2N1SUtSOU9EUUlYeXBJQT09

Meeting ID: 827 9736 7585
Passcode: GCCC

One tap mobile

+13126266799,,82797367585#,,,,*686821# (Chicago)

Meeting ID: 827 9736 7585
Passcode: 686821
Find your local number: https://us06web.zoom.us/u/kdIAqFZbZR

Please download and import the following iCalendar (.ics) files to your calendar system.
Monthly: https://us06web.zoom.us/meeting/tZYqfu6rqDwvEtGPAHF62Rhv1v5lakjdaO9W/ics?icsToken=98tyKuGqqTItGdKStRGCRpwQB4r4KOnwpmZYj7d6rD7NJXYBUAvgZ_QXPrN0GtzR

For those unable to join us on Zoom or have prior commitments, we will livestream and have a replay available on our Facebook page (https://www.facebook.com/groups/290791956162) and our YouTube channel (https://www.youtube.com/channel/UCFk2dMxcjJcX2qbSqFHQMbA).

Shares

2023-2024 Officer Nominations

Elections

The monthly meeting held nominations for the offices of the club.
The nominations this year are as follows.

Office of the President – Jim Brain
Office of Vice President – John Mark Mobley
Secretary – Brian Wieseler
Treasurer – Eric Canales

No office was contested.

There is an opportunity for any interested members to participate in club advocacy and publishing through the Newsletter operations as an editor or associate of the club.

If there is anyone interested in becoming active in writing and advocating for the CoCo in this means, please reach out to Jim Brain.

Shares

Glenside Club Meeting: Thursday September 7, 2023 @ 7:30PM Central

It’s Fall Show Time!

Fellow CoCoFEST!-ers in or around the Chicago area will be once again congregating in the area on September 9-10 for the Vintage Computer Festival – Midwest, one of the larger VCF Fests in the US. If you’re near (or even if not), consider stopping out and seeing all the exhibits! From the looks of the table reservations, CoCo is well represented.

Before the VCF-MW party starts, though, consider joining our September meeting this Thursday. It’s once again time to nominate officers for the 2023-24 term. The positions are not overly strenuous, and we’re always looking for new leadership skills.

Please join us this Thursday. We will open the call a bit early at a new time: 7:00PM.

Meeting Agenda: https://docs.google.com/document/d/1c5bIOY39sddjrFQFWSYX7zfnBI14aYn3/edit?usp=sharing&ouid=115546368758315252280&rtpof=true&sd=true

To join the Meeting

https://us06web.zoom.us/j/82797367585?pwd=OUxibkJaR2N1SUtSOU9EUUlYeXBJQT09

Meeting ID: 827 9736 7585
Passcode: GCCC

One tap mobile

+13126266799,,82797367585#,,,,*686821# (Chicago)

Meeting ID: 827 9736 7585
Passcode: 686821
Find your local number: https://us06web.zoom.us/u/kdIAqFZbZR

Please download and import the following iCalendar (.ics) files to your calendar system.
Monthly: https://us06web.zoom.us/meeting/tZYqfu6rqDwvEtGPAHF62Rhv1v5lakjdaO9W/ics?icsToken=98tyKuGqqTItGdKStRGCRpwQB4r4KOnwpmZYj7d6rD7NJXYBUAvgZ_QXPrN0GtzR

For those unable to join us on Zoom or have prior commitments, we will livestream and have a replay available on our Facebook page (https://www.facebook.com/groups/290791956162) and our YouTube channel (https://www.youtube.com/channel/UCFk2dMxcjJcX2qbSqFHQMbA).

Shares

Glenside Picnic/Gathering Sept 23

A friendly reminder we will have a gathering on Saturday, 2023 September 23 at the Woodfire Pizza in West Dundee, IL at 4:00pm. We will be there from 4:00pm until the last of us decide to leave! Glenside has made an allowance to contribute to the bill.

If you come early, there are many types of shops and amenities in the area including a river walk, vintage/antique store, old-time candy store (with sugar-free options!), retro-arcade, and more. Below are some links to additional things for you or anyone coming into town.

We won’t have a place to set up technology at the restaurant, just time to enjoy the day together. If you’re in the area and/or traveling a distance the links below are some attractions and places to visit.

LOCAL SHOPS:

Underground Retroarcade Open Saturday 5:00-11:00pm (all you can play $20 all day pass)

Around the Corner Candy Open 11:00-7:00pm

Half-Full Nest Vintage Market Open Saturday from 10:30-3:30pm

J and S River Antiques Open Saturday from 11:00-5:00pm

Depot Market – Flea Market Open Saturday from 10:00-3:00pm

Spring Hill Mall – Regular Shopping

Shares